Skip to content

Measure, fit & fix

How to stop light leaking around blackout blinds

Find where light leaks around a blackout blind with a labelled gap diagram and a troubleshooting aid for permanent or removable fitting options.

Daylight showing at the side and below a lowered roller blind beside a curtain and side-channel sample
An opaque roller blind can still leave bright routes at the sides and below the bottom bar.

Test the window in daylight and mark every bright route before buying another covering.

A face-fit blind can add overlap; side channels address the perimeter more directly.

Avoid improvised fixes that block vents, damage surfaces or introduce reachable cords and loose parts.

Diagnose where the light is entering

Lower the blind during the brightest part of the day and let your eyes adjust. Look separately at the left edge, right edge, top and sill. Then check whether the fabric itself glows evenly. A bright vertical strip usually means the cloth is narrower than the recess or sits too far forward. A halo around several edges points to insufficient overlap. A broad glow through the material suggests that the fabric is room-darkening rather than fully opaque.

Do not judge from the glass measurement alone. On a conventional roller blind, the brackets and mechanism are wider than the cloth. A blind sold as 100 cm wide may therefore cover less than 100 cm with fabric. The relevant figures are the recess width, the actual fabric width and the distance between the cloth and the wall.

The dimensioned width examples in our measuring guide illustrate the difference. For an outside fit, its calculator can help you plan centred fabric overlap using your own opening and the exact product’s documented dimensions. It calculates horizontal coverage, not a light-blocking percentage.

Take a photograph of the lowered blind from the normal sleeping position. It is often easier to see the dominant light path in a photograph than while standing next to the window.

Match the visible gap to the next check

Start with the position of the light, then consider whether permanent fitting changes are possible. Several routes can occur together. This diagram identifies locations; it does not estimate how much light enters or show a measured result for a product.

Four light-route locations around a roller blindA window and lowered roller are labelled: 1, narrow light strips beside the cloth; 2, a band above it; 3, a band below the bottom bar; 4, light passing through the fabric itself. More than one location may need attention.1. SidesSides2. Above the cloth3. Below the bar4. Throughthe fabric
Schematic only. The highlighted strips and central patch are location markers, not a darkness score, predicted glow or a claim that every opaque blind has these exact gaps.

Read the routes individually

1. Light at the sides

Start with cloth width and alignment

Check actual cloth width, whether it is centred and how far it stands away from the reveal. Correcting uneven gaps cannot create missing fabric width.

A wider face fit, a second curtain layer or a compatible side-track system may address the route. First record wall space, hardware width and window movement with the outside-recess planner. A retrofit rail needs exact system compatibility.

Consider a removable cover only if its dimensions, attachments and approved glass/frame surfaces suit the opening. Compare suction and adhesive fitting rather than assuming either is mark-free. Preserve access to the handle and vents.

2. Light above the cloth or headrail

Look behind and above the roll

Identify whether the route is behind the exposed tube, above the frame or through an uncovered fanlight. A darker replacement fabric does not cover that space.

A system-specific fascia or cassette, a properly supported pelmet or a higher curtain layer may help. Compare the cassette guide with top-gap curtain planning; confirm headroom and fixing support before changing hardware.

A compatible removable panel or an existing curtain hung at a suitable height may cover the bright area. Check that the cover reaches the entire opening and does not seal a vent. Start with no-drill window-darkening options.

3. Light below the bottom bar

Check the finish and anything stopping the bar

Look for a short drop, a sloping sill or an object holding the bar up. A skewed or sticking blind needs the maker’s operating instructions, not extra force or an added weight.

Consider a correctly measured longer covering or a maker-approved complete system with suitable bottom treatment. Record the actual drop and sill obstruction in the blind measuring guide. Do not improvise a seal that obstructs window opening.

A removable cover needs enough lower coverage without loose reachable parts or obstructed ventilation. Curtains may provide a second lower layer if their hem and support suit the room; use the curtain drop worksheet before buying.

4. Light through the fabric

Separate material transmission from an edge gap

A broad glow through the cloth can indicate a room-darkening material rather than an opaque construction. Local pinholes or a damaged coating need the product’s care/replacement advice. Opacity and edge coverage are separate questions.

Check the stated construction and exact variant before changing the material or complete blind. The blackout versus room-darkening guide explains the terms. Rails do not make a transmitting cloth opaque.

An appropriate removable opaque layer may address the material route, but still needs suitable coverage and attachment. Compare portable blackout formats; do not assume a fabric’s label proves a fully dark room.

Several edges at once

Record each route before changing the covering

Check sides, top, bottom and the cloth separately. A perimeter halo can reflect several fitting issues, not one failed material. Keep every necessary opening and ventilation path usable.

Compare a compatible complete perimeter-control system with a blind-and-curtain layer. The practical choice depends on exact dimensions, support, operation and required access, not a blanket darkness promise.

A renter-friendly covering may cover the opening more closely, but check glass compatibility, attachments and daily removal. Follow the chosen maker’s warnings for glazing and heat; do not cover intended vents.

For a layered curtain solution, use the front-overlap and wall-return diagrams. For any solution, check the actual installation again from the room position where light matters.

Reduce light at the sides

For a blind inside the recess, first confirm that it is centred and that the brackets have not shifted. A small alignment correction can make two uneven gaps less conspicuous, but it cannot eliminate the designed difference between the tube width and fabric width.

If the surrounding wall is flat and there is a safe fixing position, an outside-recess or face-fit blind can overlap the opening. Measure the complete area you want the cloth to cover, not only the window frame, and check that handles and opening sections remain usable. Follow the selected retailer’s measuring rules: some want the finished blind size, while others ask for an opening measurement and make their own allowance.

Side channels or a framed cassette take a different approach. They intercept light close to the fabric rather than relying only on extra width. This can be the stronger permanent route for a room where thin bright lines remain distracting, but the frame needs accurate sizing, suitable recess depth and reliable fixings. Compare the side-track guide with the cassette measuring guide before ordering.

A pair of generously full blackout curtains can also cover a roller blind's weak edges. Extend the pole or track beyond the opening and consider returns towards the wall. The blind-and-curtain layering guide explains how the blind controls the centre while curtains cover side routes.

Deal with light above and below the blind

Light above a roller can reflect from the top of the recess or pass behind an exposed tube. A fascia, cassette or pelmet can reduce that route when it is designed for the system. Curtains mounted higher than the window can provide a broader second layer.

At the bottom, check whether the blind stops short, the sill slopes or objects prevent the bar from lowering fully. Do not add loose weights or magnets unless the blind maker allows them. A purpose-made bottom seal, a framed system or curtains that fall beyond the sill are more predictable responses.

Leave trickle vents and required ventilation paths usable. Darkening a room is not a reason to tape over vents, obstruct an opening window or trap persistent condensation behind a covering. The GOV.UK ventilation guide for England explains why background ventilation matters; our darkened-room ventilation guide applies it to window coverings.

Choose a temporary cover when the window cannot be altered

Temporary fabric covers can sit closer to the glass and extend beyond the exposed area. The Easynight regular sheet uses hook-and-loop attachments and can be cut to an unusual shape. The Tommee Tippee Sleeptight and Amazon Basics portable curtain use suction cups on smooth glass. All three avoid drilling, but they demand more effort each time you want daylight or ventilation.

Before using adhesive attachments, check the maker’s approved surfaces and test a discreet area when practical. “Removable” does not guarantee that paint, varnish or aged sealant will be unaffected. Suction cups work best on clean, compatible glass; release each cup by its tab rather than pulling on the fabric.

For sunny glazing, follow the product’s warnings about glass compatibility and heat. Do not make a temperature-saving claim from the word “blackout” alone, and do not leave a temporary cover in place if the window or maker’s instructions indicate a risk.

Finish with a child-safety and window-use check

Where babies or young children live or visit, favour cordless or safely concealed and tensioned controls. Fit every supplied safety device exactly as instructed and keep cots, beds, playpens, highchairs and climbable furniture away from blind cords, as the Office for Product Safety and Standards advises. Check temporary covers for reachable clips, loose fabric and detachable components.

Finally, operate the whole window. Open the blind, restore daylight, use the handle, open the window where intended and confirm that vents remain clear. A darker room still needs a covering that is safe and realistic to use every day.

Products for this job

Removable options that cover beyond the glass

These products suit temporary or travel use. Confirm the current size, variant and fitting instructions before ordering.

Trim-to-fit option

Easynight Blackout Blind, regular 150 × 145 cm

Best for: A removable cover with generous edge overlap

A cut-to-size blackout sheet fixed around the window frame with removable hook-and-loop attachments. It can cover the complete opening more closely than an ordinary roller blind and packs into a storage bag between uses.

What stands out

  • Can be cut for an unusual window shape
  • Hook-and-loop attachment can reduce perimeter gaps
  • No drilling and a storage bag is included

Keep in mind

  • Adhesive suitability depends on the frame finish
  • Less convenient than a blind for frequent daylight access
  • The fabric can look utilitarian in a finished bedroom
  • 150 × 145 cm
  • Cut to size
  • Hook-and-loop fixing
  • Storage bag
Portable suction pick

Tommee Tippee Sleeptight™ Portable Blackout Blind

Best for: Travel and occasional glass-mounted use

A foldable fabric cover that attaches to glass with suction cups and adjusts to the window. It is the most travel-oriented option here and avoids permanent fixings.

What stands out

  • Packs away for travel
  • Suction-cup fitting requires no drilling
  • Adjustable fabric can accommodate different windows

Keep in mind

  • Suction depends on clean, compatible glass
  • Taking it down and refitting it adds daily effort
  • It is a functional cover rather than a fitted interior blind
  • Medium 99 × 130 cm
  • Suction cups
  • Packable
  • Adjustable
Neutral portable alternative

Amazon Basics Portable Blackout Curtain, beige, 127 × 198 cm

Best for: A large suction-mounted travel cover

A large polyester blackout cover that attaches to smooth glass with suction cups. Hook-and-loop tabs let the fabric gather to suit smaller windows, and the supplied bag makes it practical to store or pack.

What stands out

  • No drilling or adhesive on the frame
  • Large 127 × 198 cm panel
  • Includes a travel bag and is listed as machine washable

Keep in mind

  • Requires clean, smooth glass and careful suction-cup removal
  • Needs taking down to restore the full view
  • Availability and exact colour can change by retailer variant
  • 127 × 198 cm
  • Suction cups
  • Hook-and-loop adjustment
  • Travel bag

Clear answers

Frequently asked questions

Short answers to the fitting, use and care questions that most often change the result.

Why does light show at the sides of a blackout roller blind?

A conventional roller's cloth is usually narrower than its complete mechanism. Recess clearance and the distance from the fabric to the wall can make the side strips more visible. Check cloth width and fitting position before replacing the fabric.

Will a darker fabric fix light leaking around a blind?

No. A darker or more opaque cloth helps if light passes through the fabric, but it cannot close a gap beside, above or beneath it. Diagnose the bright route first.

Are side channels worth fitting to an existing blind?

They can help if the channel is compatible with the existing fabric, headrail, fixing surface and window movement. A retrofit is not universal; ask the supplier to confirm the complete system and measurements.

Can curtains cover the side gaps of a roller blind?

Yes, if the curtains extend beyond the opening with enough fullness and suitable returns. The two layers can cover different light paths, but keep the window, controls and vents usable.

Is it safe to tape over a trickle vent to improve blackout?

No. Do not block intended ventilation to gain darkness. Address the blind's fit or add an appropriate layer while keeping the vent and window operational.