What fullness actually measures
Fullness describes how much flat fabric you have compared with the usable pole or track width. Divide the combined flat width of the panels by that hanging span. A 300 cm combined flat width on a 150 cm track gives a 2:1 ratio. The figure says nothing about the opacity of the fabric; it describes how generously the curtain can fold and whether the two leading edges can meet without being pulled tight.
Use the installed hardware length, not the window width. A pole extending 20 cm beyond each side of a 150 cm opening gives about 190 cm of usable span before allowances for brackets and returns. Buying for the 150 cm pane understates what the pair must cover. Dunelm's measurement guide explains why width is taken across the pole or track and gives heading-specific starting calculations.
A roughly twice-width combined fabric allowance is a familiar starting point for many gathered curtains. It is not a mandatory blackout rule. Some wave tracks have a prescribed carrier spacing; pencil-pleat tape can be gathered to a defined width; eyelets create fixed-looking folds. Follow the chosen heading instructions and assess the pair when closed, not only how luxuriant it looks open.
Plan the pair width, including returns
The usual fullness ratio compares flat fabric with the front pole or track span. If the fabric also travels back to the wall or overlaps at the centre, record those extra paths separately. Pole extension beyond the window is already part of the front span; do not add it twice.
A worked pair-width comparison
Assume a 2,000 mm front span and a chosen 2:1 ratio throughout the complete closed path. With no returns or centre overlap, that calls for 4,000 mm of flat fabric: two 2,000 mm panels. Add 100 mm at each return and a combined 50 mm centre overlap, and the path becomes 2,250 mm. The same illustrative ratio then calls for 4,500 mm of flat fabric, or two 2,250 mm panels.
Planned path = front span + left return + right return + combined centre overlap.
Equal-panel minimum = planned path × chosen fullness ÷ 2, rounded up to a whole millimetre. This model assumes the chosen gather continues across the returns and overlap. A flat return or a supplier’s own heading method can require a different calculation.
Fullness is a width calculation, not an opacity or darkness score. Use the heading-specific drop diagrams before selecting a length, and compare front overlap with wall returns when planning edge coverage.
Why headings need different calculations
Pencil pleats are gathered by pulling cords in the heading tape, then distributing the pleats. Do not cut the heading cords; knot or secure their ends according to the manufacturer's instructions. The gathered top width must fit the track or rings, with enough fabric left for the centre to overlap. If the pair has an extremely wide flat measurement, the gathered stack may become heavy and deep.
Eyelets hang directly on a pole. Their folds are set by the number and spacing of eyelets and the pole diameter. A close-to-flat eyelet pair may form shallow pleats but pull apart slightly when closed. A wide pair gives fuller folds but needs space at the pole ends when open. Dunelm's hanging guide shows the different hardware pathways for eyelets and hook-based headings. Our eyelet versus pencil-pleat comparison looks specifically at light paths.
Wave curtains use a matched track and gliders to create consistent waves. Their nominal width should be interpreted using that system's measurements. Do not buy a wave pair and assume ordinary gliders will recreate the designed fullness. Likewise, a 2:1 flat width written on a shop page may not translate directly into the finished drawn width of a pleated made-to-measure pair.
Spot too little—or too much—fabric
With too little width, the centre edges only just touch, stitches and heading tape are strained, and the side panels may pull away from the wall. Daylight can appear in a vertical line despite an opaque fabric. A pair may also expose the frame if the pole runs well beyond the glass but the panels were sized only for the window. Correct the measurement before assuming a darker colour will solve the gap.
More fabric is not endlessly better. A heavily lined pair may exceed a lightweight pole or track rating; long spans may need centre supports. Deep stacks can cover a substantial part of the glazing when open or obstruct handles. If the leading edges bunch, they may not make a neat centre overlap. Work out both the closed width and the open stack before ordering a generous pair.
If you already own under-full curtains, consider whether a wider pair, additional matching panels, or a separate blind is sensible. Adding a single odd-width panel may create an awkward centre join. A suitable track with overlap arms addresses the join only if the panels have enough width to reach it. See our curtain-overlap guide for the wall and centre coverage calculation.
Choose the complete pair, not just a number
Compare the selected listing's per-panel width, panel count, heading and drop. The pale eyelet and black pencil-pleat examples below are different styles and sizes; use them to see how listings present dimensions, not as interchangeable treatments. If a variant selector changes the width, re-check the basket detail before checkout.
Measure the available stack space at each side. Decide whether a curtain return or a blind behind the pair will take care of the outer edge. For children's rooms, secure any blind cords or chains in the layered treatment according to UK product-safety guidance. Curtains themselves still need securely fixed brackets.
After hanging, close the curtains in the daylight condition that matters. Look from the bed, seat or desk. If the panels meet and retain natural folds without forcing the pole, the fullness is doing its job. If the room remains bright, identify whether the leak is above, at the sides, at the centre or below before buying even wider fabric. Our measuring guide provides the complete pre-order checklist.
Products for this job
Compare the stated panel widths
One eyelet and one pencil-pleat pair illustrate why flat width and heading instructions both matter.
Deconovo total-blackout coated curtains, pale khaki, 46 × 72 in, pair
Best for: A lighter face with an opaque backing
A coated-back eyelet pair intended to stop light through the cloth itself. The lighter face gives a softer room look while the backing does the opacity work.
What stands out
- Coated backing rather than relying only on a dark yarn
- Pair format
- Multiple listed colour and size variants
Keep in mind
- Coated fabrics need care-label-led cleaning
- Heavier curtains need a suitable pole and fixings
- Perimeter gaps remain unless the track or pole extends well beyond the window
- 46 × 72 in
- Pair
- Eyelet heading
- Coated back
Joydeco black pencil-pleat curtains, 55 × 96 in, pair
Best for: A long, track-compatible curtain pair
A long two-panel black curtain set with a pencil-pleat heading for hooks or a compatible track. The listing describes light reduction rather than a sealed whole-window result.
What stands out
- Two 55-inch-wide panels are listed
- Pencil-pleat heading can use rings or a suitable track
- Long 96-inch drop suits some tall openings
Keep in mind
- Hooks are not included
- Seller describes partial light blocking rather than a room seal
- The large drop may need alteration for a shorter window
- 55 × 96 in each panel
- Two panels
- Pencil-pleat heading
- Hooks not included
