Skip to content

Bedroom light-control guide

How to block streetlight from a bedroom

Find the streetlight's route into your bedroom and compare curtain overlap, blind position and temporary coverings without blocking ventilation.

Layered bedroom window coverings with a warm streetlight outside at dusk

Inspect the window from the actual resting position after dark.

Add top, side and centre overlap before replacing opaque fabric.

Keep trickle vents and window operation available.

Trace the streetlight before choosing a product

Streetlight is directional. It may strike only one pane, pass through the edge of an otherwise opaque curtain, reflect off a pale reveal or appear through the top gap above a roller. Look at the closed window from the pillow or the part of the room where light is bothersome. A photograph taken there can record the bright route. Then stand closer to the window and check whether the light is shining through the fabric or around it. Those require different changes.

Trace the streetlight before choosing a product
Where light appears Likely cause First fitting check
Full bright rectangle Uncovered glass or light-permeable fabric Panel dimensions and lining specification
Narrow vertical line at wall Curtain does not return or blind is narrower than opening Hardware width and side overlap
Bright band above window Low pole, exposed roller or uncovered vent area Top position without blocking ventilation
Line at curtain centre Panels do not meet with enough fullness Pair width, draw and centre overlap
Glow below treatment Short curtain or blind drop Sill, radiator and safe lower finish

This diagnosis prevents an expensive but ineffective purchase. A darker fabric will not cover exposed glass beside it. For a conventional roller, the fabric can be narrower than the total mechanism; our blind light-gap guide explains that geometry. For curtains, our side-gap guide and top-gap guide offer more focused checks.

Use curtain width, height and returns deliberately

If an existing pair is opaque, first look at the pole or track rather than replacing the fabric. Hardware that extends beyond the glass can let the open curtains park clear of the window and the closed panels reach the wall edges. The required extension depends on the window and heading, so do not apply a universal centimetre figure. A return-style pole allows fabric to turn towards the wall at either end. The Umbra example below is one such component, but the selected pole length and bracket fixings must suit your wall. A standard straight pole can work too if there is enough panel width and a side-return arrangement.

The curtains must meet at the centre without a V-shaped gap. Eyelet and pencil-pleat headings gather differently; check panel flat width and the intended fullness before ordering. The Deconovo pair below illustrates a ready-made dark curtain, not a guaranteed fit for every bedroom. Its stated 46 × 54 in size is per selected variant, so compare the actual drop with the pole position and the lower edge you need. Our curtain measuring guide walks through pole span and heading-specific drop.

Mounting higher can hide a line of light above the frame, but do not cover a trickle vent or prevent the window opening. A pelmet may address top glow when it can be fitted safely; the pelmet guide explains the trade-off. If you rent, use existing holes or ask permission before moving hardware. Removable sticky hooks are not automatically rated to carry a heavy curtain pair, and a falling pole is not a sensible solution to a light problem.

When a blind is the better first layer

A roller blind can target the glass while leaving a decorative curtain for the outer perimeter. Face-fitting it outside the recess may allow more overlap than a tight recess fit, provided there is sound fixing and enough room. A framed cassette with side rails may control edges more closely, but is a different installation and cannot be assumed compatible with every existing window. For a rented room, a suitable no-drill blind or temporary cover may be more realistic. The no-drill guide compares those options.

Do not expect an opaque roller alone to eliminate all light. Headrail, side and sill geometry still matter. If the streetlight is directly opposite the bed, even a thin gap may be conspicuous in an otherwise dark room. A two-layer arrangement—blind at the window, curtain across the outer opening—can cover different paths. Our layering guide sets out the spacing and operation checks. Try the existing curtain with the blind first before ordering a second opaque layer; the problem may already be solvable with better positioning.

At the same time, avoid improvised sealing of ventilation. England's existing-home ventilation guide advises keeping trickle vents open and unblocked. If a vent faces a streetlight, plan the covering around it instead of stuffing it shut. The covering also needs to leave handles, restrictors and normal window opening usable.

Check the room as used, not a product photograph

Close the treatment at the time the light is most noticeable. Observe it from the bed, not just directly in front of the window. Check reflected light from a mirror, glossy wardrobe or pale side wall before buying more fabric; sometimes repositioning an object reduces a secondary glow. If a door fanlight or glazed bedroom door is the route, a window blind will not solve it—see our glazed-door guide.

For households with children, inspect any looped blind control behind the new curtain. The Office for Product Safety and Standards says safety devices for looped blinds must be fitted and that cots, beds and climbable furniture should be kept away from cords. A curtain is not a safety cover for an older chain. Choose the room arrangement as carefully as the textile.

Streetlight intensity and direction can change with seasons, leaves or replacement street furniture. Keep the fitting adjustable where practical. The durable improvement is usually a measured amount of coverage at the actual light path, paired with a routine that still lets the room be aired and the window used normally.

Products for this job

Two curtain components worth comparing

These illustrate an opaque curtain pair and a return-style pole. Their dimensions and mounting requirements must suit your window; they are not a promise of a fully dark room.

Flexible size range

Deconovo blackout eyelet curtains, black, 46 × 54 in, pair

Best for: An affordable ready-made eyelet pair

A widely sized pair of soft eyelet curtains made for a standard pole. The dark colour is useful where room darkening matters more than a pale decorative finish.

What stands out

  • Many size and colour variants are grouped under the listing
  • Pair format suits conventional bedroom windows
  • Simple eyelet heading is quick to hang on a compatible pole

Keep in mind

  • Darkening depends on pole position, width and centre overlap
  • Eyelets can leave a bright band above a low-mounted pole
  • The listing's thermal wording is not a measured room-saving guarantee
  • 46 × 54 in
  • Pair
  • Eyelet heading
  • Polyester
Wall-return pole

Umbra Twilight wraparound curtain pole, black, 30–84 in

Best for: Bringing eyelet curtain ends closer to the wall

A curved-end steel curtain pole that lets a compatible curtain return towards the wall instead of ending in front of the window edge. It addresses side spill, not the gap above the heading.

What stands out

  • Curved ends bring fabric back towards the wall
  • Adjusts across the listed span
  • Supplied hardware includes a centre support

Keep in mind

  • The curtain still needs enough width to form the return
  • A centre support and sound wall fixings are essential
  • Does not close a bright gap above the pole
  • 30–84 in adjustable span
  • Black steel
  • Single wraparound pole
  • Centre support required

Clear answers

Frequently asked questions

Short answers to the fitting, use and care questions that most often change the result.

Why does a streetlight show around blackout curtains?

Blackout fabric can be opaque while the panels leave uncovered space at the top, sides, centre or hem. The light route is a fitting issue rather than necessarily a fabric defect.

Will one roller blind stop a streetlight?

It may substantially reduce direct light, but ordinary rollers commonly leave side and top gaps. Check from the bed before deciding whether a second layer is needed.

Do wraparound poles help with side light?

They can let suitable curtains return towards the wall at the ends, but enough panel width, suitable wall fixings and a closed centre join are still needed.

Can I tape a curtain to the wall?

This can damage finishes and make the curtain impractical. Use a correctly fitted return, wider hardware or a suitable removable cover instead, subject to surface instructions.

Should I close the trickle vent to block the glow?

No. Plan the covering so the vent remains usable. The ventilation route matters even if a small amount of light is visible around it.