Why a bright strip appears above curtains
Light may pass over a pole, behind a heading that projects into the room, or between the top of the fabric and the ceiling. An opaque lining stops light through the central panel, not around its top edge. A pelmet is a shaped cover over the curtain hardware. When it extends past the illuminated route and projects far enough forward, it can mask that route from the room. It is therefore a potentially useful piece of light control, not a magic blackout material.
First close the curtains at the time the gap looks brightest. Look at the wall above the window from the bed. If a narrow strip is visible just above a low pole, moving the hardware higher may solve more than adding a cover. If light wraps over a pole or through an eyelet heading, a pelmet can interrupt it without changing the fabric. If the curtain itself glows across its whole face, address the lining instead. Our curtain-lining guide explains that distinction.
Measure the cover around the installed hardware
The top cover needs to be wider than the exposed light route and deep enough to conceal the view over the heading. Measure the usable pole or track, outer brackets and how far the curtains project when closed. Allow room for gliders or rings to move; a tight box can catch folds and prevent full closure. John Lewis's curtain buying guide gives a general framework for mounting hardware above and beyond the opening. A pelmet must be designed around that actual hardware rather than the glass alone.
Construction varies: a rigid painted box, a fabric-covered board and a soft valance do not create the same opaque top barrier. A soft valance may be decorative but leave a route behind it. A rigid cover can project further and conceal a pole, but it adds weight and fixing demands. Check wall or ceiling structure, hidden-service risk and whether the fixing allows access to clean or remove the curtains. Avoid covering trickle vents or other intended ventilation, and preserve access to the window.
An overly deep pelmet can intrude visually into a small room. A top treatment should work with the rest of the wall, not simply grow until it hides every part of the window. Mock up the depth with cardboard or removable paper before commissioning or drilling. Look from the bed and from the doorway, then test whether the curtains still open completely.
A pelmet leaves other light paths untouched
A top cover cannot correct a pole that ends at the frame, a pair that barely meets in the middle, or a hem above the exposed glass. Those problems need side overlap, more fabric, a centre-overlap solution or a better drop. It also cannot make an ordinary sheer curtain opaque. Our curtain-overlap guide maps these four directions.
The cover itself can create a safety or maintenance problem if poorly fixed. Use brackets and anchors suited to its weight and substrate, particularly above a cot or bed. In a child's room, keep the cot away from the window and control any blind cords or chains in layered treatments. The Office for Product Safety and Standards gives the relevant UK blind-cord advice. Do not attach a substantial pelmet to weak adhesive hooks merely to avoid drilling.
When another top fix is simpler
A high ceiling-mounted track can bring the curtain heading nearer the ceiling, shortening or hiding the bright route. A correctly placed wall track or raised pole may do the same without a separate cover. The track example below is a flexible, light-to-medium-duty product, not a pelmet and not a heavy-curtain recommendation. The curved pole example is primarily for side returns, not top coverage. They are shown only to frame alternative hardware choices.
Some specialist tracks include optional centre-overlap arms; Silent Gliss documentation shows why features must be verified model by model. A blind behind curtains is another way to stagger light routes, but it adds hardware, measurement and possibly cord-safety considerations. Before buying anything, decide whether the top gap is actually the dominant leak. The targeted guide to reducing light above blackout curtains provides a diagnostic sequence.
Products for this job
Alternative hardware to consider
These examples are a track and a return-style pole—not pelmets. They may suit different top or side-gap plans when a pelmet is impractical.
Speedy bendable curtain track, white, 5 m
Best for: Planning a close-mounted pencil-pleat track
A cuttable, bendable track supplied with gliders and brackets for pencil-pleat curtains. It can be face- or top-fixed, but its own listing limits use to light- or medium-weight curtains.
What stands out
- Top- or face-fix options are listed
- Can be trimmed or bent for the layout
- Gliders and brackets are included
Keep in mind
- Listed for light- to medium-weight curtains only
- No built-in centre overlap or pelmet is claimed
- Fixings must match the wall or ceiling substrate
- 5 m total track
- White
- 50 gliders and 20 brackets listed
- Light- to medium-weight curtains
Umbra Twilight wraparound curtain pole, black, 30–84 in
Best for: Bringing eyelet curtain ends closer to the wall
A curved-end steel curtain pole that lets a compatible curtain return towards the wall instead of ending in front of the window edge. It addresses side spill, not the gap above the heading.
What stands out
- Curved ends bring fabric back towards the wall
- Adjusts across the listed span
- Supplied hardware includes a centre support
Keep in mind
- The curtain still needs enough width to form the return
- A centre support and sound wall fixings are essential
- Does not close a bright gap above the pole
- 30–84 in adjustable span
- Black steel
- Single wraparound pole
- Centre support required
