Choose whether the hardware follows or crosses the bay
A track fitted within an angled bay changes direction at its corners. It preserves the projection of the bay as a seating area or alcove and lets curtains run close to the glazing. A straight pole or track across the bay's room-side opening creates a flat curtain wall. That can cover the awkward corner seams of individual blinds, but it uses more room depth when closed and needs clear fixing points beyond the opening. Make a plan view of the bay before ordering either route. Mark radiators, seats, door swings, furniture and the space available for the curtain stack when open.
For a shaped track, measure the actual route along each face, including returns and bends. The overall straight-line width across the bay is not its track length. Also note whether curtains will stack at one side, split at the centre or park outside the glass area. Tight bends can increase friction, particularly with heavy lined panels. Our curtain-track guide covers the difference between bendable and pre-formed hardware. For a square bay, a supplier may use dedicated corner pieces rather than trying to bend a product beyond its stated radius.
Ceiling fixing can place the heading closer to the top of the bay and reduce one light path. Wall fixing may suit a sound lintel or side return. Neither is safe merely because a screw will bite into plasterboard; the support must carry the total moving load. Check the track's stated capacity and bracket spacing against the actual curtain weight. A very long bay with several folds can be substantially heavier than a short ready-made pair. Do not assume a flexible 5 m track is suitable for every blackout curtain: the Speedy example below is positioned by its seller for light-to-medium uses and needs a load check before pairing with any heavy panels.
Size the finished curtains for the full path
Blackout fabric needs enough width to move around the bay, form its heading and still meet without being pulled tight. Measure the usable track length, not the glass width. Then apply the chosen heading's fullness instructions to find total flat panel width. Pencil pleat, wave, pinch pleat and eyelet headings consume width differently. Our fullness guide explains the calculation and why a pair's labelled width may refer to each panel or to the pair. A curtain that barely spans the track can leave the centre open after gathering.
Check the finished drop from the point specified for that heading. A ceiling track's hook position is not the same as the top of an eyelet pole. Consider whether the hem ends at the sill, below the sill or close to the floor. A longer drop can cover light below the glass, but it must not drag across a radiator, conceal persistent condensation or obstruct a walkway. Our measuring guide gives the standard recording sequence; this bay guide adds the changing track direction and stack position.
| Curtain route | Main advantage | Main constraint |
|---|---|---|
| Shaped bay track | Keeps the bay usable and follows the glazing | Bends, weight and corner travel must work together |
| Straight room-side track | Covers several window joints with one line | Uses depth and may block bay access when closed |
| Separate small panels | Gives face-by-face control | More centre joins and more hanging points |
Deal with top, return and centre light paths
Even genuinely opaque fabric does not seal a bay automatically. A bright band can appear above the heading if the track sits below the glazing top. A return gap can appear where the curtain stops short of the wall. At the centre, two panels may pull apart on a bend or fail to overlap. Mock up the proposed hardware line with removable tape and stand where you will use the room. Look from more than one angle, especially toward the bay corners at dawn.
A ceiling track or pelmet can help with top spill; a wraparound return can bring the fabric toward the wall at the sides. Both require compatible hardware and room for the folds. Our guide to light above curtains and guide to side gaps explain these edge details. A blind in each bay face can add daytime control while the curtain closes across the whole opening, but extra layers should not interfere with opening sashes or ventilation. If children use the room, any underlying blind cords still need to meet UK product-safety guidance.
Inspect the fixing substrate before drilling. A bay ceiling may conceal a steel lintel or have little solid timber where an attractive photograph suggests a bracket could go. Follow the selected track's installation instructions and use a competent fitter if fixing points or load are uncertain. Test every bend and return after installation, with the panels attached, rather than assuming smooth travel from an empty track.
Use product examples for the right job
The flexible Speedy track below illustrates a bendable hardware format; the DECONOVO pair illustrates a ready-made blackout curtain fabric. They should not be bought as an assumed matched kit. The listed DECONOVO eyelet heading needs a compatible pole, not ordinary track gliders. If you choose a track, look for a hook-compatible heading and verify panel weight. If you choose eyelets, plan a bay-capable pole with bend or corner fittings and suitable support.
For a bay where the priority is independent control of each window rather than a continuous fabric layer, read blackout blinds for bay windows. For measuring the actual face geometry before discussing a quote, use our bay-window measurement sheet. Keep both the track sketch and chosen panel specifications together: they are more useful than a generic “bay curtain” label when replacing fabric later.
Products for this job
Track and curtain formats to compare
The flexible track and ready-made eyelet pair are separate format examples, not a compatible set. Eyelets need a suitable pole; a track usually needs hook or glider-compatible headings.
Speedy bendable curtain track, white, 5 m
Best for: Planning a close-mounted pencil-pleat track
A cuttable, bendable track supplied with gliders and brackets for pencil-pleat curtains. It can be face- or top-fixed, but its own listing limits use to light- or medium-weight curtains.
What stands out
- Top- or face-fix options are listed
- Can be trimmed or bent for the layout
- Gliders and brackets are included
Keep in mind
- Listed for light- to medium-weight curtains only
- No built-in centre overlap or pelmet is claimed
- Fixings must match the wall or ceiling substrate
- 5 m total track
- White
- 50 gliders and 20 brackets listed
- Light- to medium-weight curtains
Deconovo blackout eyelet curtains, black, 46 × 54 in, pair
Best for: An affordable ready-made eyelet pair
A widely sized pair of soft eyelet curtains made for a standard pole. The dark colour is useful where room darkening matters more than a pale decorative finish.
What stands out
- Many size and colour variants are grouped under the listing
- Pair format suits conventional bedroom windows
- Simple eyelet heading is quick to hang on a compatible pole
Keep in mind
- Darkening depends on pole position, width and centre overlap
- Eyelets can leave a bright band above a low-mounted pole
- The listing's thermal wording is not a measured room-saving guarantee
- 46 × 54 in
- Pair
- Eyelet heading
- Polyester
