Skip to content

Curtain hardware guide

Curtain tracks for better blackout

Compare ceiling and wall fitting, gliders, returns and centre overlap when choosing a curtain track for a darker room.

Dark curtains suspended from a neat ceiling-mounted track in a bedroom

Choose ceiling or wall fixing according to the available structure.

Check that the track is rated for the weight of the lined pair.

Do not assume a bendable track includes an overlap arm.

What a curtain track can offer

A track holds curtain gliders along a rail rather than rings around a visible pole. Some mount to the wall, others to the ceiling; some are straight, while purpose-made or bendable versions can follow a bay or turn toward a wall. This flexibility can help cover the top and sides of a window. It does not make a thin curtain opaque, and an ordinary track is not automatically a sealed blackout system.

The first choice is where the rail can be fixed securely. A ceiling-mounted track can place the heading close to the ceiling and hide a gap above a window, but only if the ceiling construction accepts the load. A wall-mounted track may sit closer to the window than a projecting pole. Dunelm's track-and-pole measuring guide provides a starting framework for extension and placement.

Choose the heading before ordering. Pencil pleats normally use hooks in heading tape attached to gliders; wave curtains use a matched carrier system. Eyelets are for poles. The track's hook and glider arrangement affects the finished drop, so measure from the actual installed rail according to the curtain supplier's diagram. See our heading comparison for the practical differences.

Separate top, centre and side features

High placement can hide the top edge of the opening. A track that turns towards the wall can bring outer curtain fabric back to the wall. A centre-overlap arm places one leading edge in front of the other. These are three separate features; buying a track for one does not imply the other two. Silent Gliss's hand-operated track documentation shows overlap arms as optional on particular systems, underlining the need to check exact components.

If a bright vertical line remains where panels meet, check that the combined panel width is sufficient before buying an overlap accessory. A designed carrier cannot pull too-short curtains together. At the sides, a return needs enough fabric to follow it. Where a bay requires a bend, confirm the minimum bend radius and whether gliders pass smoothly around it. A track may also need stops so a child or daily user cannot pull gliders off the end.

For extremely demanding darkening, a fitted blind behind a curtain can interrupt a second light path. But a blind adds a separate fitting and, if corded, a child-safety obligation. The Office for Product Safety and Standards explains why accessible blind loops must be controlled.

Support the full curtain weight

The rail, brackets, gliders, hooks and wall or ceiling anchors all need to carry the pair. Blackout lining makes the curtains heavier; a 5 m rail is not necessarily suitable for a 5 m heavy curtain span simply because it is long. Read the supplier's load guidance and bracket spacing. Check whether a bay bend or splice changes the rating. Do not hang lined curtains from an unsupported plasterboard fixing or drill where services may be present.

Measure the complete route, including side returns, and plan where the pair will stack when open. A ceiling track running wall to wall can look tidy but may place furniture behind the open fabric. Check handles, trickle vents, radiators and any required window escape route. Test glider movement before hanging the full weight; a sticking track can pull brackets loose over time.

A flexible-track example with a clear limit

The Speedy white bendable track below is listed with gliders and brackets and can be top- or face-fixed. Its seller describes it for light-to-medium curtains. That means it should not be assumed suitable for a heavy lined pair without checking the actual fabric weight, span and fixing schedule. It is also not presented as having an overlap arm. The Joydeco pencil-pleat pair demonstrates a hook-based heading, but its hooks are not included and its weight must be checked separately.

If the principal need is a centre overlap with heavy curtains, look for a track whose manufacturer specifies that component and load class. If the principal need is to cover a side gap on a standard window, a return-style pole may be simpler. Our wraparound pole guide compares that route. After fitting, close the treatment in daylight and inspect the top, centre and sides from the actual resting position. A neat rail is valuable only if the whole system operates reliably.

Products for this job

Track and compatible-heading examples

The bendable track is listed for light-to-medium curtains. The pencil-pleat pair is a separate example; check the combined weight and glider compatibility before pairing them.

Flexible track

Speedy bendable curtain track, white, 5 m

Best for: Planning a close-mounted pencil-pleat track

A cuttable, bendable track supplied with gliders and brackets for pencil-pleat curtains. It can be face- or top-fixed, but its own listing limits use to light- or medium-weight curtains.

What stands out

  • Top- or face-fix options are listed
  • Can be trimmed or bent for the layout
  • Gliders and brackets are included

Keep in mind

  • Listed for light- to medium-weight curtains only
  • No built-in centre overlap or pelmet is claimed
  • Fixings must match the wall or ceiling substrate
  • 5 m total track
  • White
  • 50 gliders and 20 brackets listed
  • Light- to medium-weight curtains
Pencil-pleat pair

Joydeco black pencil-pleat curtains, 55 × 96 in, pair

Best for: A long, track-compatible curtain pair

A long two-panel black curtain set with a pencil-pleat heading for hooks or a compatible track. The listing describes light reduction rather than a sealed whole-window result.

What stands out

  • Two 55-inch-wide panels are listed
  • Pencil-pleat heading can use rings or a suitable track
  • Long 96-inch drop suits some tall openings

Keep in mind

  • Hooks are not included
  • Seller describes partial light blocking rather than a room seal
  • The large drop may need alteration for a shorter window
  • 55 × 96 in each panel
  • Two panels
  • Pencil-pleat heading
  • Hooks not included

Clear answers

Frequently asked questions

Short answers to the fitting, use and care questions that most often change the result.

Are curtain tracks better than poles for blackout?

They can be when they allow a high fixing, side return or designed centre overlap. A basic straight track with short curtains can still leave gaps.

Can I hang eyelet curtains on a normal track?

Not directly. Ordinary eyelets are for a pole; conventional tracks use hooks and gliders with a compatible heading such as pencil pleats.

Does every curtain track have an overlap arm?

No. It is a specific component on selected systems. Check the model's parts list rather than assuming a centre overlap.

Can a bendable track carry heavy blackout curtains?

Only if its stated load and fixing method suit the combined fabric weight and span. Some flexible tracks are specified for light-to-medium curtains.

Is ceiling fixing always possible?

No. Check the actual ceiling structure, services, substrate and manufacturer's brackets. A sound wall-mounted track may be safer in some rooms.