Skip to content

Existing-blind safety

How to make existing blinds safer around children

Check older roller, Roman, venetian and other blinds for accessible loops, compatible safety devices and climbable furniture using UK guidance.

Cordless roller blind fitted above a clear window area with furniture set well away

Inspect every operating cord, including behind curtains and in guest rooms.

Fit a compatible tensioner, tidy or cleat exactly as specified.

Recheck furniture placement and replace a blind that cannot be made suitable.

Start with an honest inspection of every window

Begin in any room a young child uses, including a guest bedroom used at weekends. Look for operating loops on rollers, Roman blinds, pleated blinds, venetians and verticals. Pull the curtain aside; a chain hidden behind it can still be accessible. Check both raised and lowered positions and any loose cords that appear only when the blind moves. The Office for Product Safety and Standards guidance identifies blind cords and loops as a danger to young children and sets out household steps. If a reachable loop exists, keep children away from that area while you arrange a proper solution.

Find any maker label, installation paperwork or order record. Identify whether the control is a continuous chain, separate draw cords, a wand, a spring or a motor. Look for a supplied tensioner, tidy, cleat or breakaway already fitted. A device fixed with a loose screw, hanging from tape, or sitting in a drawer does not provide its intended function. Photograph the blind and fitting for the manufacturer or installer if you cannot identify them. The BBSA's window-blind safety guidance provides different older-blind videos by type; a Roman blind is not repaired by automatically copying a roller-blind method.

Do not assume a post-2014 purchase ends the check. The BBSA says blinds sold in the UK since February 2014 must comply with child-safety standards, but devices still require proper installation and everyday use. Equally, an older blind is not necessarily beyond repair. The practical question is whether this specific blind can be fitted with the correct device on a sound adjacent surface and kept out of reach in this room. If that cannot be established, replacement may be the clearer route.

Use a compatible device, not an improvised knot

OPSS states that tidies and tensioners should be firmly fixed to an adjoining surface so the cord or chain remains tight. Cleats should be out of children's reach on an adjacent surface at least 1.5 metres above the floor. After each use, secure the spare cord in a figure of eight on the cleat. Those are specific operating requirements, not decorative fittings. Use the blind's instructions for device type, screws and location; a weak fixing in crumbling plaster can fail. If unsure of the wall or frame substrate, use a competent fitter.

Some blinds use breakaway controls; these are designed to separate under a specified load. Replacing one with a stronger join, tying the ends together or taping it shut defeats the purpose. A random online chain clip is not proof of compatibility with a particular mechanism. Ask the blind supplier which retrofit is approved. If the product is very old or unidentifiable, a new cordless blind may be simpler than guessing at parts. “Cordless” still requires secure mounting and an appropriate window fit; it is a control choice, not a claim that every related risk has disappeared.

Use a compatible device, not an improvised knot
What you find Sensible next step Do not assume
Loose continuous chain Identify and securely fit specified tensioner A tied loop is equivalent
Spare draw cord Use correct cleat and store cord after every operation A high-looking cord cannot be climbed to
Broken breakaway Request exact compatible replacement A permanent join is safer
No model information Seek maker or professional identification Any generic device will fit

Change the room layout as well as the hardware

OPSS specifically says to keep cots, beds, highchairs and playpens away from blinds because children climb. Also consider chairs, storage units, toy chests and other moveable objects. The relevant question is whether a child could reach an operating cord from where they sleep, stand or climb—not whether the chain happens to be above an adult's waist. Our cot and furniture clearance guide gives a practical room scan. There is no official universal distance between a cot and a window to quote; the often-cited 1.5 metres is a cleat-height instruction above the floor.

Look at the full window environment. A second curtain may conceal rather than remove a loop. A temporary suction panel can introduce loose attachment pieces while the old blind stays behind. Furniture may be moved during cleaning, and an older child may reach further than expected. Treat a fix as a combination of a correctly installed control, suitable furniture layout and repeat inspection. A dark room with a hidden hazardous cord is not a successful room-darkening project.

When replacement is the responsible decision

If there is no safe way to mount the specified device, the mechanism is damaged, its identity is uncertain, or a child can still access its cord, consider replacing the blind with a suitable safe-by-design control. The BBSA recommends such options particularly where young children live or visit. A replacement does not need to be sold as a special “nursery” product; examine the actual operating method, fixings, access and room layout. If light control matters, compare fabric and edge coverage separately from safety. Our blind-cord reference sets out the core UK requirements.

For a rented property, report the issue to the landlord or managing agent and ask how it will be corrected. For grandparents or other hosts, raise it before the visit rather than modifying their window on arrival. If the room cannot be made suitable in time, use another room. Keep a record of the device or replacement installed and recheck it after redecorating or a furniture move. Safety devices only work when they stay secure and are used correctly each day.

Clear answers

Frequently asked questions

Short answers to the fitting, use and care questions that most often change the result.

Can I shorten an old blind cord myself?

Do not make an improvised change to an unknown mechanism. Identify the model and follow its manufacturer's instructions or ask a competent blind fitter.

Does a cleat make any old blind safe?

No. The device must suit the control and be fitted and used correctly; some blind types require a different device or replacement.

Where should a cleat be fitted?

OPSS says out of children's reach on an adjacent surface at least 1.5 metres above the floor, with all spare cord secured in a figure of eight after each use.

Are blinds fitted before 2014 automatically unsafe?

Not automatically, but the BBSA says older blinds may contain hazardous loops. Inspect the actual product and consult its type-specific safety guidance.

What if the blind belongs to a landlord or host?

Tell the person responsible about the hazard and request a proper correction. Do not secretly modify a mechanism or rely on a second covering to hide it.