Skip to content

Glazed door guide

Blackout coverings for French doors

Compare door-mounted panels and room-side curtains for glazed French doors while keeping handles, hinges and door access clear.

Paired French doors with individual dark window coverings and clear handles

Measure each glazed door leaf and its handle clearance separately.

Decide whether the covering should travel with the door or hang in the room.

Check attachment surfaces and safe operation before buying.

Start with the way the doors move

French doors are a hinged pair. One may be the everyday active leaf and the other may open only after a bolt is released. They have a centre meeting stile, outer hinges, handles, lock hardware and sometimes narrow glazed side panels. These parts create both light paths and obstacles for a blind. Before shopping, open each leaf to its normal maximum and photograph the clearances from inside. Note whether the doors open inward or outward, whether a handle projects across the glass and whether furniture blocks a room-side curtain.

Measure the exposed glass of each leaf, then the available flat surface on the door around it. Do not assume the two panes are identical. A product that covers the glass may still leave a bright line around the glazing bead, at the centre join or below the door. Decide which of those lines matters from the position where the room is used. Blinds2go's fitting-system comparison shows several approaches, including frame-integrated styles; the fact that a blind is described as “for doors” does not mean it fits every bead or profile.

If the pair is frequently used to access a garden, a loose full-width panel can become inconvenient. A covering mounted to each leaf travels with the door. A room-side curtain opens completely out of the way but may block the doors when closed. Neither is inherently better; consider use frequency and whether the doors are an important route through the room. Do not use a blackout installation to obstruct a door that must open normally.

Compare door-mounted panels with room-side fabric

Removable panels can be a practical temporary route. The Maritown example below is a cuttable adhesive-format shade; the Tommee Tippee example is a portable suction format. Both require exact variant checks. Adhesive may not suit textured, delicate or recently painted joinery. Suction needs clean, appropriate glass and can release with time or changes in surface condition. A portable product may have a larger fabric area than a single pane and need careful folding so it does not catch the handle. These are examples of attachment methods, not ready-made French-door kits.

Frame-fit or clip-in blinds can look neater on compatible uPVC door glazing, but compatibility depends on the glazing bead and frame. Do not wedge a generic clip under a gasket or seal. The product maker's fitting diagram should name the supported profile and required measurements. A conventional roller mounted above the entire pair is possible if wall space and door swing allow it, but the roll and chain must not foul the active door. Our no-drill guide explains why “no drill” still requires a specific compatible frame.

Curtains can span the central join and cover the outer edges. A track placed wider than the doors lets fabric stack clear of the opening. Check that its drop does not drag into the threshold and that the panels can be moved aside quickly for access. Our curtain-overlap guide covers side coverage and centre meeting. If the doors open inward, test the full swing with the curtain stacked; a deep heading or pole may be in the way.

Compare door-mounted panels with room-side fabric
Solution Moves with the door? Main constraint
Adhesive or suction panel Yes, if mounted on each leaf Surface, size and handle clearance
Frame-fit blind Yes, on compatible glazing Exact bead and frame profile
Room-side curtain No; stacks beside opening Track strength and door access

Fit around hardware, seals and safety features

Mark the handle's full sweep on a temporary paper template. A blind can clear the handle when the door is shut but catch it as the handle rotates. Check hinges, thumb turns, letter plates, threshold and weather seals as well. Avoid covering ventilation slots or fastening anything into the glazed unit or seal. A door-mounted shade must not interfere with locking, unlocking or ordinary opening. If you are unsure whether a fixing surface forms part of the door's weatherproofing, ask the door manufacturer or installer.

Children may be able to reach door-level blind chains more easily than a high window control. The UK OPSS blind-cord guidance is the authority for loop hazards; choose a suitable control and install the supplied safety devices exactly as directed. A removable suction panel avoids a chain, but keep loose fabric and detachable parts out of young children's reach as the product instructions require.

For a rented home, confirm what can be attached to glass or painted frames. Clean the chosen surface only in the way the manufacturer permits. Adhesive removal can lift paint or leave residue; a “temporary” product is not a guarantee of damage-free removal. If the door contains older or fragile glazing, avoid forceful suction-cup pressing and seek specialist advice. Preserve the door's normal ventilation and inspect for condensation behind a panel.

Check the result with both doors in use

Fit a trial covering to one leaf if possible, then open and close it repeatedly. Check the handle, active and passive leaves, locks and any curtain stack. Stand in the room at daylight and look for the strongest remaining line: centre joint, outer frame, top or threshold. A small centre line may be better addressed by a full-width curtain layer than by oversizing a panel so it crosses the active door.

If the opening is actually a sliding patio door, use our patio-door guide: its moving geometry is different. For a single window next to the doors, a portable blackout panel may be easier to manage than changing the whole door treatment. Keep your measurements and product instructions for future replacement, because door leaves that look alike can have different clearances.

Products for this job

Removable formats for individual glazed areas

These products illustrate adhesive and suction fitting. They are not purpose-made French-door sets; confirm each pane's size, frame finish, handle clearance and removal instructions.

Large stick-on panel

Maritown stick-on temporary blackout blind, 120 × 180 cm

Best for: A broad removable cover without suction cups

A cut-to-size black fabric panel with self-adhesive fixing and adjustable clips. It offers more coverage than many suction products where the frame finish is suitable.

What stands out

  • 120 × 180 cm size
  • Can be cut down
  • No drilled holes

Keep in mind

  • Adhesive can mark or lift delicate finishes
  • Daily removal is less convenient than a roller
  • The panel must be kept securely fitted and out of children's reach
  • 120 × 180 cm
  • Cut to size
  • Self-adhesive fixing
  • Adjustable clips
Portable suction pick

Tommee Tippee Sleeptight™ Portable Blackout Blind

Best for: Travel and occasional glass-mounted use

A foldable fabric cover that attaches to glass with suction cups and adjusts to the window. It is the most travel-oriented option here and avoids permanent fixings.

What stands out

  • Packs away for travel
  • Suction-cup fitting requires no drilling
  • Adjustable fabric can accommodate different windows

Keep in mind

  • Suction depends on clean, compatible glass
  • Taking it down and refitting it adds daily effort
  • It is a functional cover rather than a fitted interior blind
  • Medium 99 × 130 cm
  • Suction cups
  • Packable
  • Adjustable

Clear answers

Frequently asked questions

Short answers to the fitting, use and care questions that most often change the result.

Can I put a blind on each French door?

Often, if the selected fitting is compatible with the door and clears handles, hinges and seals. Test both leaves through their full swing.

Are suction-cup blackout panels suitable for door glass?

They can suit clean, sound glass within their size and attachment limits, but suction performance varies. Follow the maker's instructions and check the panel cannot catch a handle.

Will a curtain across both doors make the room darker?

It can cover the central join and outer frame, provided it has enough width, top coverage and returns. It must still allow the doors to be used safely.

Can an adhesive panel damage a painted door frame?

Yes, removal can affect some finishes. Check the product's approved surfaces, test only where permitted and choose a reversible option for delicate or rented joinery.

Should I block a door's ventilation slot for blackout?

No. Keep intended ventilation and normal door operation available; address unwanted light without sealing functional components.