
The short answer
Open the sash and copy the complete type-sign code
Choose a roof-window blind from the identification plate, not an approximate glass measurement. VELUX says windows made after 1968 have a type sign at the top sash; the type, size and generation together determine which cassette, rails and brackets fit.
Photograph the complete type sign before browsing so letters and zeros are not confused.
M04, MK04 and MK34 can refer to different generations or compatibility groups; match the listing exactly.
Keep the code and blind model with your paperwork for future rails, clips and replacement parts.
Product shortlist
Three code-specific blackout options
These examples cover older and newer code families. They are not interchangeable, even where the stated nominal dimensions appear similar.
VELUX original replacement blackout blind, M04/M34, black
Best for: An older VELUX M04 or M34 window
An original VELUX replacement blind for older M04 and M34 window codes. It is a precise compatibility purchase: the label on the top sash decides whether this variant belongs on the window.
What stands out
- Made by the window manufacturer
- Cordless manual operation
- Code-matched rail system
Keep in mind
- This replacement range is not the same as every current MK04 product
- Compatibility must be checked before ordering
- A genuine blind may cost more than a third-party alternative
- M04 / M34
- Cordless
- Manual
- Black
Itzala blackout blind for VELUX M04 and MK34 roof windows
Best for: A compatible VELUX M04 or MK34 roof window
A code-specific roof-window blind with aluminium rails and stepless manual positioning. It follows the slope of a compatible VELUX window rather than hanging away from the glass.
What stands out
- Aluminium rails manage side light on a sloping window
- Manual stepless positioning
- Uses the roof-window code to select the fit
Keep in mind
- Only compatible with the stated VELUX codes
- Not a substitute for checking the label on the open window
- Colour and code combinations sit under related variants
- M04 / MK34 variant
- Aluminium rails
- Manual
- Code-specific fit
Bloc Skylight blackout blind for VELUX MK04, black
Best for: A code-matched MK04 roof window
A rail-guided roof-window blind made for the MK04 code. It is a third-party alternative that follows the window slope and is selected by the window label rather than room-side glass measurements.
What stands out
- Code-specific roof-window fit
- Side rails guide the blind on a slope
- Manual handle positioning
Keep in mind
- The MK04 variant must not be assumed to fit another code
- Third-party fit should be checked against the entire compatibility statement
- Black fabric is visually strong when open
- MK04
- 603 × 780 mm listed
- Side rails
- Manual
At a glance
The window plate is authoritative. Recheck the selected retailer variant immediately before ordering.
| Option | Listed code | Brand route | Guides | Main check |
|---|---|---|---|---|
| VELUX replacement blind | M04 / M34 | Original accessory | Side rails | Older window generation |
| Itzala compatible blind | M04 / MK34 | Compatible alternative | Aluminium rails | Exact stated code pairing |
| Bloc Skylight blind | MK04 | Compatible alternative | Side rails | Do not substitute for M04 |
Find and record the type sign
Do not begin with a tape measure. VELUX’s type-sign guidance states that roof windows produced after 1968 have a plate giving the window type, size, variant and production code. On a pitched roof window it is normally at the right corner of the top sash behind the ventilation flap.
Open the window from a stable position and photograph the complete plate. Clean it gently if needed without removing it. Record every letter and number exactly, including spaces and leading zeros. A second photograph showing the whole window helps if you need manufacturer support.
The code tells you which accessory geometry was designed for the sash. A rough glass size cannot reveal the bracket pockets, rail length or generation.
Understanding M04, MK04 and MK34
VELUX has changed its size notation over time. Older windows may use codes such as M04, while newer generations use forms such as MK04. Compatible accessory makers sometimes group transitional labels, including MK34, in a single listing.
The shared “04” does not make all three equivalent. A listing that says MK04 only should not be ordered for an M04 window. Conversely, a product that explicitly lists M04 and M34 may be intended for an older generation. Trust the exact compatibility table for the selected model.
If the type sign contains an unusual or non-standard code, contact VELUX support with the photograph. Do not choose the closest-looking option.
The three options in more detail
VELUX original replacement blind: M04 and M34 route
The original replacement listing in our shortlist is for M04 and M34-coded windows. It uses a manual blind with guide rails and is relevant when replacing a treatment on the specified older window family.
An original-brand route can simplify bracket and colour matching, but the brand name does not override the code. Confirm the selected variant in the basket and check whether existing brackets are reused or replaced by the supplied kit.
Itzala compatible blind: M04 and MK34
The Itzala option lists M04 and MK34 compatibility, aluminium rails and manual stepless positioning. It provides an alternative where those exact codes appear on the plate.
Read the variant title and compatibility information together. Retail pages can group colours and sizes, so switching colour may change the selected code. Keep a screenshot of the final configuration.
Bloc Skylight blind: MK04
The Bloc Skylight option is listed for MK04 and uses side rails to keep the fabric against the sloping window. It suits that newer code, not an older M04 by visual approximation.
Check the window condition before fitting. Damaged bracket points, a distorted sash or previous adhesive may need attention first. A new blind cannot correct a window that no longer closes squarely.
Why rail-guided blinds suit roof windows
An ordinary vertical roller relies on gravity. On a sloping window, it would hang away from the glass. A roof-window system encloses the roll at the top and guides the fabric edges along the sash, allowing the control bar to stop at different positions.
The rails also reduce direct side light compared with an open roller. They do not make the construction magically airtight. VELUX support explains that light through the perimeter can increase when the cassette is not fully located, the side channels do not meet it flush or the control bar has not reached its final lower position.
This is a useful diagnostic sequence before replacing a blind: clean the channels, check visible alignment and operate the control through its full travel without force.
Manual, electric and solar operation
Manual blinds suit reachable windows and avoid wiring or batteries. Use a proper control rod for a high sash if the maker provides one; do not balance on furniture. Confirm that the handle and blind can operate independently.
Electric or solar blinds can suit inaccessible windows, but they must match both the window and the control ecosystem. Product codes such as DKL, DML and DSL identify different operating formats in the VELUX range. Check current compatibility and electrical requirements directly with the manufacturer.
Do not convert a manual listing into a powered assumption because photographs look similar. The motor, brackets and controls are model-specific.
Fitting sequence and common mistakes
Read the exact instruction sheet from start to finish and inventory the parts. Protect the glazing and sill. Fit any top brackets in the indicated factory positions, seat the cassette until the instructions’ engagement point is reached, then align side rails without twisting them.
Tighten fixings evenly. A rail pulled out of line can pinch the fabric. Test the blind several times before refitting decorative covers. The bottom control bar should reach the specified closed position; stopping short can leave a bright strip.
Common mistakes include reversing rails, forcing the cassette, using the wrong generation’s holes and leaving packaging spacers in place. If the components do not align with light hand pressure, stop and verify the code.
Darkness, heat and honest expectations
An opaque roof-window blind reduces incoming daylight, but “100% blackout” typically describes the cloth rather than every installed edge. A small perimeter glow can be normal. Excessive bright lines may indicate fit or alignment problems.
Interior blackout blinds can shade a room, but do not promise a fixed temperature reduction. Exterior awnings or shutters intercept more solar energy before it passes through the glazing. Follow current GOV.UK hot-weather guidance for England: shade sun-facing windows and ventilate when it is safe and cooler outside.
For winter comfort, a specialised energy blind may use a different pleated construction. Verify any performance figure and its test basis on the current manufacturer page rather than transferring it to a standard roller blind.
Cleaning and keeping the code useful
Dust the fabric and rails gently. Do not spray cleaner into the cassette or lubricate channels unless the instructions specifically allow it. Grit can scratch the coating and oil can stain the cloth.
Store the type-sign photograph, order confirmation and blind model together. If a clip, rail cover or control bar later needs replacing, that record is more reliable than measuring an installed part.
Bottom line
Use the VELUX replacement option for the listed older M04 or M34 family, the Itzala alternative for its stated M04 or MK34 fit, and the Bloc Skylight option for MK04. If your plate shows another code, none of these is automatically suitable.
For wider roof-window comparisons, see our best blackout blinds for skylights and cassette blackout blind guide.
Clear answers
Frequently asked questions
Short answers to the fitting, use and care questions that most often change the result.
Where is the VELUX window code?
VELUX says the type sign on pitched roof windows is normally in the right corner of the top sash behind the ventilation flap. Open the sash safely and photograph the whole plate.
Are VELUX M04 and MK04 the same size?
They belong to different coding generations and should not be treated as interchangeable. Some accessories list cross-generation compatibility, but buy only when the exact code appears in the maker’s fit list.
Can I measure the glass instead of using the code?
No. Approximate glass dimensions cannot identify bracket, rail and generation details. Use the type sign; contact the manufacturer with a photograph if the code is damaged or unusual.
Do VELUX blackout blinds stop every trace of light?
The fabric can be opaque, but some light may remain around the construction. Correct seating of the top cassette, side rails and bottom control position affects the result.
Can I fit a VELUX blackout blind myself?
Many manual accessories are designed for straightforward fitting to compatible windows, but follow the exact instructions and work safely at height. Use a competent installer if access, wiring or the window condition makes the job uncertain.